💪 Leg Arms! 💪 – Welker Farms Inc

💪 Leg Arms! 💪 – Welker Farms Inc


hey YouTube so its leg arms here today
I’ve actually never made a video of well doing whatever I do so I decided I guess
I’ll just go ahead and make one and and or actually I’ll have Nick edit it and
I’ll just record it and then you guys can watch what I do so today what I’m
gonna do is I have to make an adapter for our drill bit on this crane right
here you can see that okay so we’ll go outside these drill bits right here have
a two inch shaft okay it’s a hexagon shaft and I have to make an adapter to
make them fit this shaft right here on our digger Derek is a two and a half
inch shaft so it’s just not gonna quite fit in there so I got to make something
okay so now I got to make a adapter so what I’m going to do is to take flat
iron which I cut to length right here it’ll lay them on each part of the flat
surface and when I lay them across and weld them all up so now I have a socket
that’ll slide over two and a half then I got to go to two-inch now I’ve got a
hexagon shaft coming in the mail it’s not here yet and it will I’ll make an
adapter well back to this and then you can just bolt it right on and where you
go okay so the process what I’m going to do is take a liminal foil and I’m gonna
wrap this shaft right here so when I clamp the pieces down I’ll have a little
bit of clearance in there slop so I can get it an on and off otherwise if I
clamp it right to the piece of steel and weld it all up it’s gonna be so tight we
might have to use the bud to rip it off which I really don’t want to do so yeah
let’s not do that but first I’ve got a drill holes on two of these pieces to
match up with this okay so I got to mark it all off drill
the hole and then I can put them all together and weld them all up this is
called a colt you see those three sides the purpose of
this is to squeeze onto this big old bit right here we’re going to put those into
an end mill which is this sucker right here I actually really like it it works
pretty good and we have to swap out the bit next thing I’m going to do is take a
piece of steel like this which is a piece of scrap I have I’m going to cut
it in half and then make it so that there’s two rings I can weld on to where
these holes are okay I want more surface area for the bolt to
wear on instead of that flat piece of iron then it’s gonna get like oblong so
I will take this and make two collars and you’ll see some wave action this
right here is our lathe and I’m going to take the lathe and I’m going to take
this piece of steel that you see drill all the way through cut it in half and
make it the right size diameter for that bolt and then those two pieces like I
said will weld right on to this okay let’s go have some fun and there we go two cups and then
they’ll be welded right like that so now as you can see there’s gonna be a lot
more surface area for that bolt to wear on otherwise what would happen is you’d
have a huge wear mark that’d be on one side and the other side we shall see and
as you can see something like that so I finished welding it up but when I tried
to take it off it did not want to come off so I had to cut the seam split it
and then try to wedge it off and come to find out this shaft here where they had
a bit at one point here it twisted the shaft just slightly so instead of having
a straight edge like this it had a slight curl to the edge so I had to
ground all that down and then I welded it up but as you can see there’s quite a
bit of slop and I can pull it right off and there we go
there is part of my adapter now that I have my two inch hexagon shaft I got to
drill two holes in it to make it so it adapt to the drill bits and then what
I’m gonna do is you can see I got to make an adapter to weld this together Hey finished product so far as you can
see – and shopped i weld it in to this here and tooth out there now I got a two
and a half two inch reason why I put this band here and this band here so
that case that happens to crack it won’t split the seams so now you can stake it
show it in and pin it wait that’ll work

100 thoughts on “💪 Leg Arms! 💪 – Welker Farms Inc

Leave a Reply

Leave a Reply

Your email address will not be published. Required fields are marked *